Show Trip Statistics In The Centre Display - Volvo XC90 TWIN ENGINE Owner's Manual

Resetting the trip meter
Reset the trip meter TM with one long press on
the RESET button on the left-hand stalk switch.
Trip meter TA only has automatic resetting. The
meter is reset if the car is not used for four hours
or more.
Change unit
Change the units for mileage, speed, etc. via the
centre display as follows:
1. Press Settings in the top view.
2. Press
System Units.
3. Under Units , select the required unit stand-
ard: Metric , Imperial or US .
NOTE
In addition to in the trip computer, these units
are also changed in Volvo's navigation sys-
tem*.
Related information
•
Trip computer (p. 170)
•

Show trip statistics in the centre display

(p. 173)
•
Using the application menu in the driver dis-
play (p. 109)
INSTRUMENTS AND CONTROLS
Show trip statistics in the centre
display
Trip statistics from the trip computer are dis-
played graphically in the centre display and pro-
vide an overview that facilitates more fuel-effi-
cient driving.
Open the Driver performance
app in app view in order to
show the trip statistics.
Each bar in the diagram sym-
bolises a distance of 1, 10 or
100 km, alternatively miles. The
bars are filled in from the right as driving pro-
gresses. The bar on the far right shows the value
for the current distance.
The average fuel consumption and total driving
time are calculated since the last time the trip
statistics were reset.
Fuel and electricity consumption are shown in
separate graphs. Electricity consumption is "net"
consumption, i.e. energy consumed minus regen-
erated energy created during braking.
* Option/accessory, for more information, see Introduction.
}}
173