Volvo XC90 TWIN ENGINE Owner's Manual page 138

INSTRUMENTS AND CONTROLS
||
2. Make sure that the backrest with head
restraint does not come into contact with the
front seat when lowered. Lower the backrest
forward until it locks into position.
> The seat cushion folds down/forward
when the backrest is lowered in order to
create a flat surface. The head restraint
lowers automatically when the rear seat is
lowered.
WARNING
Make sure the backrests are properly locked
after they are lowered.
To raise the backrest to the upright position:
1. Pull the handle on the side of the seat
upwards and hold the handle in the raised
position while raising the backrest.
2. Make sure that the backrest with head
restraint does not come into contact with the
front seat when raised. Raise the backrest
and release the handle.
3. Slide the backrest until the catch engages.
4. The head restraint is raised manually.
WARNING
Check that the backrests and head restraints
in the rear seat are locked properly after
being folded up.
136
WARNING
The head restraints on the outer seats in the
second seat row must always be raised when
the third seat row is occupied by passengers.
Related information
•
Rear seat (p. 131)
•
Adjusting the backrest rake in the second
seat row (p. 134)
•
Lowering backrests in the third seat row
(p. 137)
•
Adjusting the head restraints in the second
seat row (p. 132)
Entry/exit for third seat row
In order to smoothly and easily be able to get in
and out of the third seat row, the second seat
row can be adjusted.
1. Pull upward/forward on the handle located at
the top of the outer seats in the second seat
row.
2. Fold the backrest forward and slide the
whole seat forward.
To raise the seat to the upright position:
– Slide back the seat and raise the backrest
until it locks.
WARNING
Check that the backrests and head restraints
in the rear seat are locked properly after
being folded up.