Programming; Using Programming Bar Codes; Configure Other Settings - Datalogic Gryphon GFS4400 Quick Reference Manual

Fixed mount area imager bar code reader

Hide thumbs Also See for Gryphon GFS4400:

Table of Contents

Programming

The reader is factory-configured with a set of standard default features. Af-

ter scanning the interface bar code from the Interfaces section, you can se-

lect other options and customize your reader through use of the

programming bar codes available in the Gryphon I GFS4400 Product

Reference Guide (PRG).

Programming can also be performed using the Datalogic Aladdin™ Con-

figuration application, which is downloadable from the Datalogic website

listed on the back cover of this manual. This multi-platform utility pro-

gram allows device configuration using a PC. It communicates with the

device using a serial or USB cable and can also create configuration bar-

codes to print.

This manual contains bar codes which allow you to reconfigure your read-

er. Some programming bar code labels, like

"Reset Default Settings" on

, require only the scan of that single label to enact the change.

page 11

Other bar codes require the reader to be placed in Programming Mode

prior to scanning them. Scan an ENTER/EXIT bar code once to enter

Programming Mode; scan the desired parameter settings; scan the EN-

TER/EXIT bar code again to accept your changes, which exits Program-

ming Mode and returns the reader to normal operation.

Additional programming bar codes are available in the PRG to allow for

customizing programming features. If your installation requires different

programming than the standard factory default settings, refer to the PRG.

Gryphon™ GFS4400

Table of Contents

Show Quick Links

Table of Contents