Installing Detectors & Sirens; Door Contact; Motion Detectors - Honeywell Le Sucre User Manual

Installing Detectors & Sirens
Note: After correctly installing a device you will hear short beeps from the Badge reader or
the keypad

Door contact

Please refer to the printed manual supplied with the product for full guidance.
Install the contact:

Inside the room to be protected

Opposite the hinges for faster opening detection

Attach the magnet to the opening part, for example the door and not the frame

Attach the sensor to the door frame and not the door

With the magnet opposite the mark shown on the detector

With less than 2 cm between the magnet and the detector when the door/window
closed

So that opening the door or window fully does not damage the magnet
Do not install the contact:

Outdoors

Near a water point (e.g. bathroom)

Motion detectors

Please refer to the printed manual supplied with the product for full guidance.
Install the detector:

In a circulation area, preferably pointing towards entrances (e.g. door, window)

Preferably in a corner to optimize the detection area

In a place where animals cannot get within a distance of 1.80 m by climbing on
furniture, stairs, boxes or any other object

In a detection area free of obstacles (e.g. curtains, wardrobes)

At a height of between 2.30 m and 2.50 m above the ground
Do not install the detector:

In a room smaller than the detection area (at least 4 m²)
13