Accumet XL 20 User Manual page 86

BOD Setup: BOD Setup Screen
XL40 and 60 meters
The BOD Setup screen present many options to control the operating parameters of the meter.
The meter is factory set with regard to these options, and is ready for use under most
circumstances (see 'Appendix: XL Series Meters Factory Default Settings' section for default
settings). The operating parameters of the BOD mode can be set and controlled from the BOD
setup screen. The BOD setup screens are virtually identical to the DO setup screens with
exceptions noted. The previous section on the DO Setup will guide you through the various
options available in the BOD setup mode. The main difference is the BOD has a configuration to
edit in the setup mode, see next page for details.
To Set BOD Configuration
Example: - BOD Setup screen
Function Buttons on BOD Setup Screen
Touch OK to confirm BOD Setup and return to the BOD Measure screen.
Touch Cancel to exit and return to the BOD Measure screen without confirming BOD Setup.
Touch View will bring up Select View dialog box. You will have the option of selecting the BOD
results or the all BOD data points stored in the memory.
When you touch the Help button, information about the current screen appears. This information
includes step-by-step instructions for operating the meter from the current screen and possible
applications information for that screen.
Touch Reset to reset all BOD Setup Criteria to the factory default.
75