Accumet XL 20 User Manual page 20

Getting Started: XL Series Meters Connectors
Getting Started: Startup and Shut down procedures
Important: It is recommended to follow the following start-up and shut down procedures to avoid
crashes, lock-ups or data loss. Start and shut down procedures are also illustrated on the slip
attached with the adaptor cable.
Start-up procedure:
1. Connect the 9V DC power jack of the adaptor to the rear connector panel of the XL
meter.
2. Connect 2 pin power plug into the power outlet or terminal strip.
3. Switch power on (wall socket or terminal strip).
4. Press the black button on the base of the meter for 5 seconds.
5. Release the button to power on the meter.
Shut down procedure:
1. Close all applications and log off.
2. From the HOME screen tap the bottom of the screen to bring up the task bar.
3. Tap Start>Shut down. This launches Shut down window.
4. Tap the Yes button on Shut down window to power off the meter.
Caution: Do not remove power from the XL meter until the meter shuts down.
XL60 meter
XL15, 20, 25, 30, 50 and 60 meters
9