Accumet XL 20 User Manual page 110

TDS Setup: TDS Setup Screen
XL20, 30, 50 and 60 meters
Available in XL20, XL30, XL50 and XL60 meters, the TDS Setup screen present many options to
control the operating parameters of the meter. The meter is factory set with regard to these
options, and is ready for use under most circumstances (see 'Appendix: XL Series Meters
Factory Default Settings' section for default settings). The operating parameters of the TDS
mode can be set and controlled from the TDS setup screen. The TDS Setup section will guide
you through the various options available in the TDS setup mode.
Example: - XL60 TDS Setup screen
Function Buttons on TDS Setup Screen
Touch OK to confirm TDS Setup and return to the TDS Measure screen.
Touch Cancel to exit and return to the TDS Measure screen without confirming TDS Setup.
Touch View to view all TDS data points stored in memory. See 'TDS Setup: View Stored Data'
section for details.
When you touch the Help button, information about the current screen appears. This information
includes step-by-step instructions for operating the meter from the current screen and possible
applications information for that screen.
Touch Reset to reset all TDS Setup Criteria to the factory default.
99