Table of Contents
Advertisement
In these conditions, you can do the
following:
Lower the sensitivity of the autowipers
to reduce the amount of smearing.
Switch to normal or high-speed wipe.
Switch the autowipers off.
E102033
A
High sensitivity
B
On
C
Low sensitivity
The rain sensor monitors the amount of
moisture on the windshield and
automatically turns on the wipers. It will
adjust the wiper speed by the amount of
moisture that the sensor detects on the
windshield.
Use the rotary control to adjust the
sensitivity of the rain sensor. Set the
control to low sensitivity, and the wipers
will turn on when the rain sensor detects
a large amount of moisture on the
windshield. Set the control to high
sensitivity, and the wipers will turn on when
the rain sensor detects a small amount of
moisture on the windshield.
Keep the outside of the windshield clean
because the rain sensor is very sensitive. If
the area around the interior mirror is dirty,
then the wipers may turn on, for example,
if dirt, mist or insects hit the windshield.
Ecosport (CBY) Rayong (Thailand)/Haiduong (Vietnam), enPHI
Wipers and Washers
You can switch this feature on and off
through the information display. See
(page 53).
WINDSHIELD WASHERS
Note: Do not operate the washers when
the washer reservoir is empty. This may
A
B
cause the washer pump to overheat.
C
E102051
Push the button to operate the washers.
When you release the button, the wipers
will operate for a short time.
REAR WINDOW WIPER AND
WASHERS
Intermittent Wipe
E102052
Pull the lever toward you.
38
(If Equipped)
Advertisement
Table of Contents
