Front And Rear Brakes - KYMCO MXER 50R Owner's Manual

WARNING
POTENTIAL HAZARD
Failure to inspect the ATV before operating.
Failure to properly maintain the ATV.
WHAT CAN HAPPEN
Increases the possibillty of an accident or
equipment damage.
HOW TO AVOID THE HAZARD
Always inspect your ATV each time you use
it to make sure the ATV is in safe operating
condition.
Always follow the inspection and
maintenance procedures and schedules
described in the Owner's Manual.

Front and rear brakes

1.
Drum brake
Check for correct free play in the brake levers.
If the free play is incorrect, adjust it. (See
pages 110~117.)
Check operation of the levers. They should
move smoothly and there should be a firm
feeling when the brake is applied. If not, have
the machine inspected by a KYMCO dealer.
Disk brake
2.
Make sure there is no brake fluid leakage.
Check operation of the levers. They should
move smoothly and there should be a firm
feeling when the brake is applied. If not, have
the machine inspected by a KYMCO dealer.
Brake operation
3.
Test the brakes at slow speed after starting
out to make sure they are working properly. If
the brakes do not provide proper braking
performance, inspect the brakes for wear.
(See page 110.)
41