Hyundai H-1435 Instruction Manual page 3

Cassette recorder with cd/mp3/usb/sd
Table of Contents

Advertisement

Available languages

Available languages

Remote controller
1
2
3
1. BAND/PLAY/PAUSE button
2. BACK/TUNE- button
3. REPEAT/PROG/MEMORY button
4. STOP/FM.MODE button
5. NEXT/TUNE+ button
6. SKIP+10/FOLDER/MEM.SET button
7. CD/USB/SD button
Important safeguards
• Attention: The owner's manual contains
important operating and maintenance
instructions. For your safety, it is necessary to
refer to the manual.
• Dangerous voltage: Uninsulated
dangerous voltage that may be of sufficient
magnitude to constitute a risk of electrical
shock to persons is present within this product
enclosure.
• Caution: To reduce the risk of electric
shock, do not dismantle the body. Prefer
servicing to qualified service personnel. Do not
use the unit in places where it can be exposed
to water, moisture and dust. Make sure that
pins or other foreign objects do not get inside
the unit; they may cause malfunctions, or
create safety hazards such as electrical shock.
Power supply
Battery operation
4
• Open the battery compartment cover.
• Insert 6 batteries (UM-2). Please observe
5
correct battery polarities or the set will not work.
• Close the battery compartment cover.
6
AC operation
7
• Before the first connecting of the appliance
check that voltage indicated on the rating label
corresponds the mains voltage in your home.
• Insert the plug into power supply.
Caution:
• When the set is only used with AC or is
not used for 2 weeks or more, please remove
the batteries, to avoid damage to the set from
leakage of batteries.
• Always switch off the unit when not in use.
• Always unplug the appliance from power
supply, when not in use long time.
Stereo headphone connection
• For private listening, insert 3.5 mm
headphone into the stereo headphone jack (on
the back side of the unit).
• Adjust volume control to the appropriate
level as desired by turning VOLUME regulator.
• When the stereo headphone jack is
plugged, speakers will disconnect automatically.
Radio operation
• Set FUNCTION switch to RADIO position.
• Select your desired broadcasting band by
pressing PLAY/PAUSE/BAND (AM/FM) button.
• Press NEXT/TUNE UP (NEXT/TUNE+
on the RC) or BACK/TUNE DOWN (BACK/
TUNE- on the RC) buttons and then release
the buttons when the fast scanning starts.
The frequency will continue to change and will
automatically stop when a broadcast station is
Instruction manual
3

Advertisement

Table of Contents
loading

Table of Contents