Table of Contents
Advertisement
5. Applications
5.1. Antennas
5.1.1. Checking the antenna
It is a good idea to check an antenna before connecting it to the receiving or
transmitting equipment. The SWR graph mode is good for this purpose:
The above picture shows SWR graph of an HF antenna. The operating frequency is 7.1
MHz. The SWR at this frequency is about 1.1, which is acceptable.
The next screen shot shows SWR graph of a simple dipole antenna with a desired
operating frequency of 14.1 MHz:
The actual resonant frequency is about 13.4 MHz, which is too far from the desired
one. The SWR at 14.1 MHz is about 2.5, which is not acceptable in most cases.
5.1.2. Adjusting the antenna
When the measurement diagnoses that the antenna is off the desired frequency, the
analyzer can help in adjusting it.
15
Hide quick links:
Advertisement
Table of Contents
