Belt Switch - GE GFDS350ELWW Service Manual

Belt Switch

Switch shown in closed position
The belt switch is fastened to the motor base plate with 2 Phillips-head
screws. The belt switch is activated by the movement of the idler arm. If the
drive belt breaks or comes off the idler pulley, the belt switch opens power
to the motor interrupting dryer operation. The drum lamp will operate with
an open belt switch.
To remove the belt switch:
1. Remove the motor and blower wheel.
2. Remove the 2 Phillips-head screws that attach the belt switch to the
motor base plate.
49
Copyright 2011