GE GFDS350ELWW Service Manual page 67

Motor & Blower Wheel
13. Compress and remove
the rear motor strap from
the motor support.
14. Loosen the two 1/4-in.
hex-head screws on the
front motor strap.
15. Lift and remove the
motor from the motor
bracket.
NOTES:
• When installing the motor to the motor bracket, install the motor with the
motor harness terminals at the 9:30 o'clock position.
• After installing the motor, ensure both moisture shields are properly
installed.
Rear Motor Strap
Copyright 2011
Front Motor Strap
67