Winding Bobbin Thread - JUKI LBH-1790 Instruction Manual

11. WINDING BOBBIN THREAD

1 Set the bobbin.
Fit a bobbin fully onto the bobbin winder shaft.
Then push the bobbin thread guide in the
direction of the arrow mark.
2 Display the bobbin winding screen.
Press BOBBIN WINDER button
data input screen (blue) or the sewing screen
(green) and the bobbin winding screen is
displayed.
3 Start bobbin winding.
Depress the start pedal, and the sewing machine
rotates and starts winding bobbin thread.
4 Stop the sewing machine.
Press STOP button
machine stops and returns to the normal mode.
Or, depress the start pedal twice during winding
bobbin and the sewing machine stops while the
bobbin thread winding mode stays as it is.
Depress the start pedal again and the bobbin
winding starts again. Use this way when winding
bobbin thread around plural bobbins.
When winding the bobbin thread in
the state that sewing is not performed,
remove the needle thread from the
thread path of thread take-up and
remove the bobbin from the hook.
(A) in the
(B) and the sewing
–  –
A
B