Performing Communication By Using Rs-232C - JUKI LBH-1790 Instruction Manual

29-3 Performing communication by using RS-232C

[ Setting procedure ]
It is possible to send and receive the data, by using RS-C cable, with the personal computer or the like.
For the cable to be connected, connect reverse type -pin (female) to the operation panel side.
Caution : If the contact part becomes dirty, failure of contact will be caused. Do not touch by hand, and
control so that dust, oil or other foreign material does not adhere to it. In addition, the inside
element is damaged by static electricity or the like. So, be very careful when handling.
( Setting procedure )
When the lower part of the cover located on the side of the operation panel is opened, there is the connector
of -pin for RS-C. Connect the cable there. When the screw for locking is attached to the connector,
tighten the screw to prevent it from falling.
– 0 –