Advertisement
Dusting tool
PUSH
Push accessory brush into hand vac nozzle to attach.
TIP: Crevice tool can not be extended.
Powered turbo tool
PUSH
Push powered turbo tool into hand vac nozzle to attach.
NOTE: When unit is on, the powered turbo tool
will be on.
TIP: Crevice tool can not be extended.
NOTE: The powered turbo tool has its own motor and a motor protective device; should debris jam the turbo
tool and stop it from rotating, switch the unit OFF, remove the powered turbo tool from the unit, remove the
debris jamming the turbo tool and assemble the powered turbo tool attachment back on the unit. Then wait a few
minutes prior to turning the unit ON again.
Using your machine
PULL
To remove dusting tool, gently pull tool away from
hand vac.
PULL
To remove power nozzle, gently pull tool away from
the hand vac.
Advertisement
