Advertisement
Using your machine
Turning your machine On and Off
Slide the power switch to the ON position.
Quick-fl ip crevice tool
FLIP
PUSH
Flip crevice tool out to line up with nozzle then
push in until secured in place.
When completed, slide the power switch to the
OFF position.
NOTE: Empty and clean the unit and fi lter after
each use or after large pickups when the unit
becomes full.
TIP: The power switch must be in the OFF
position for the unit to charge.
PULL
FLIP
To store crevice tool: gently pull the tool away from
the dust cup and fl ip the tool up towards the unit
& press down until you feel it lock into place.
Advertisement
