Manual Registration - Siemens gigaset S1 User Manual

Preparing to use your phone
For the initial charge we recommend a continuous, uninterrupted
W
charging period of five hours, whatever charge status is indicated. After
a while the charge capacity of the batteries will decrease for technical
reasons.
The battery charging status is correctly displayed only after uninterrupted charging/
discharging. You should therefore avoid removing the batteries unnecessarily and
ending the charging process prematurely.
Once initial charging is complete, you can replace your handset in the
◆
base after each call. Charging is controlled electronically. This ensures
i
that the batteries are charged in a way that maximises their life.
The batteries heat up during charging. This is normal and not
◆
dangerous.

Manual registration

If automatic registration is interrupted or if you wish to use your Gigaset S1 colour
handset at a different Gigaset base (1000, 2000, 3000 or 4000 family), then you must
register it manually. You must initiate handset registration on the handset and on the
base.
1. On the handset
ì
[______________________________________________]
[______________________________________________]
Register H/Set
[______________________________________________]
Base 1
OK
Base 1 flashes in the display when the system PIN has been entered.
2. On the base
Please refer to the operating instructions for the base to find out how to initiate handset
registration on the base.
6
Open the menu.
Select the menu item and confirm.
OK
Select the menu item and confirm.
OK
Select base (1–4) and confirm, e.g. Base 1.
OK
Enter the system PIN of the base (the default is
0000) and confirm.