Siemens Service Equipment User Manual - Siemens MC 60 Service Manual

S I E M E N S P T E L T D
MC 60 Level 2 Service Manual
10

Siemens Service Equipment User Manual

Introduction
Every LSO repairing Siemens handset must ensure that the quality standards are
observed. Siemens has developed an automatic testing system that will perform all
necessary measurements. This testing system is known as:
Siemens Mobile Service Equipment
Using this system vastly simplifies the repair of the phones and will make sure that:
1. All possible faults are detected
2. Sets, which pass the test, will be good enough to return to customer.
Starting from the P35 Series, Siemens will introduce a simpler and faster testing platform
for testing a repaired Siemens mobile phone. The testing platforms are either base on
R&S CMD 53/55 or CTS55 GSM test set.
There is also test software under development for testing with the Wavetek 4201S and
the 4107 GSM test set.
Level 2.5 service software is also under development for more elaborate testing for the
repair for the L55 series mobile phone.
THE LSO WILL HAVE TO PURCHASE THE SYSTEM, CHOOSING BETWEEN
THE COMPLETE PACKAGE AND SUB-SET OF
A F U L L Y
P O S S I B L E I F T H E C O M P L E T E S Y S T E M I S I N S T A L L E D .
Make sure that your CTS firmware is Version 3.01 or higher. For CMD 55 it
must be Version 4.03 and higher. Please check with the Service Info
SB_0500 for the CTS/CMD Hardware Options.
Copyright © Siemens Pte Ltd.
All Rights Reserved
ICM MP CCQ ASP/ASC
A U T O M A T I C T E S T
Page 22 of 37
IT.
P R O C E D U R E I S
Siemens Technical Support Centre
Internal Use Only
O N L Y