profiline TV7331 Installation Manual page 47

This submenu applies to PATTERN mode:
Program the camera as follows:
PATTERN MENU
PATTERN
TYPE
COLOR
RETURN
1. Move the cursor to select PATTERN. Select ON.
2. Move the cursor to select TYPE. You can select different patterns with the LEFT/RIGHT keys.
3. Set your monitor accordingly, or, with the oscilloscope, check the quality of the video line.
4. Select COLOUR and change the colour setting accordingly.
5. To quit the PATTERN display, select PATTERN and then OFF.
OFF
HSR
BLUE
This submenu applies to APERTURE mode:
Program the camera as follows:
APERTURE MENU
AP GAIN L
AP GAIN H
V AP GAIN
RETURN
1. Move the cursor to select AP GAIN L and while looking at the monitor or oscilloscope, use
the RIGHT/LEFT keys to select a value for the horizontal fine tuning in the lower frequency
range. (00-03)
2. Move the cursor to select AP GAIN H and while looking at the monitor or oscilloscope, use
the RIGHT/LEFT keys to select a value for the horizontal fine tuning in the upper frequency
range. (00-03)
3. Move the cursor to select V AP GAIN and while looking at the monitor or oscilloscope, use
the RIGHT/LEFT keys to select a value for the vertical fine tuning. (00-15)
Note: The higher the value, the clearer the picture.
47
02
02
10