profiline TV7331 Installation Manual page 44

This submenu applies to PTL mode:
Program the camera as follows:
PUSH TO LOCK MENU
PTL
RETURN
1. Point the camera to a reference area (white wall, paper, etc.).
2. Select PTL PUSH with the cursor and then press ENTER. The camera now assumes that the
received value is white and adjusts all other colours accordingly.
Note:
If the camera receives a non-white colour as the reference colour, e.g.: a red or blue sheet
of paper, the colours of the contrary areas will be distorted in the video picture.
PUSH
This submenu applies to MANUAL mode:
Program the camera as follows:
MANUAL WHITE BALANCE MENU
R GAIN STD
B GAIN STD
RETURN
1. Select R GAIN with the cursor and set a higher or lower red factor using the RIGHT/LEFT
keys.
2. Select B GAIN with the cursor and set a higher or lower blue factor using the RIGHT/LEFT
keys.
44