Operation; Before Startup; Scope Of Delivery; Description Of The Appliance - Kärcher K 2.21 Operating Instructions Manual

Operation

Scope of delivery

The scope of delivery of your appliance is il-
lustrated on the packaging. Check the con-
tents of the appliance for completeness
when unpacking.
In the event of missing accessories or any
transport damage, please contact your
dealer.

Description of the Appliance

These operating instructions describe the
maximum equipment. Depending on the
model, there are differences in the scopes
of delivery (see packaging).
Illustrations on Page 2
1 High pressure connection
2 Detergent suction hose (with sieve)
3 Appliance switch "0/OFF"/ „I/ON"
4 Carrying handle
5 Storage for trigger gun
6 Storage for spray lance
7 Water connection with integrated sieve
8 Coupling element for water connection
9 Mains cable with mains plug
10 Trigger gun
11 Lock trigger gun
12 Clamp for high pressure hose
13 High pressure hose
14 Spray lance with Dirtblaster
15 Spray lance with pressure regulation
(Vario Power)
Special accessories
Special accessories expand the possibili-
ties of using your appliance. Please contact
your KÄRCHER dealer for further informa-
tion.
14 English

Before Startup

Mount loose parts delivered with appliance
prior to start-up.
Illustrations on Page 2
Illustration
 Pull out the clamp for the high-pressure
hose from the trigger gun (e.g. with a
small screwdriver).
Illustration
 Connect high pressure hose to trigger
gun.
 Push the clamp in until it locks. Check
the secure connection by pulling on the
high-pressure hose.

Water supply

Note: Impurities in the water can damage
the high-pressure pump and accessories.
For protection, the use of the KÄRCHER
water filter (optional accessory, order no.
4.730-059) is recommended.
Water supply from mains
Observe regulations of water supplier.
For connection values, see type plate/tech-
nical data.
 Use a fibre-reinforced water hose (not
included) with a standard coupling.
(Minimum diameter 1/2 inch (13 mm),
minimum length 7.5 m).
 Screw the coupling element to the wa-
ter connection on the appliance.
 Push the water supply hose onto the
coupling unit, then connect it to the wa-
ter supply.