Table Of Contents - Mirage B 1018 G User Manual

0.0 Quick Connect
Important: Read this section first!
1.0 Mounting Considerations
1.1 Cooling and Temperature
1.2 Power Wiring
1.3 RF and Controls Cables
1.4 Mobile Mounting Conderations
1.5 Home or Fixed Installations
1.6 Repeater Mounting
2.0 Radio or Exciter
2.1 Drive Level
2.2 Duty Cycle
2.3 T/R Control or "Keying"
2.4 Wiring
3.0 FM, CW and Non-Linear Modes
3.1 Drive Power
3.2 Duty Cycle CW and FM
3.3 Feedlines and Antennas
4.0 SSB and Linear modes
4.1 Splatter and Distortion
4.2 Drive Power
4.3 Duty Cycle
4.4 T/R Control or Switching
4.5 Power Output
4.6 Antennas and Feedlines
5.0 Receiving Preamplifier (Pre-Amp)
5.1 Signal-to-noise Ration
5.2 Intermodulation (IMD) Products
6.0 In Case of Difficulties
6.1 Does Not Transmit or Receive at All
6.2 Nothing Lights or Seems to Work
6.3 Transmit OK, Does Not Amplify Receive
6.4 Receives OK, Does Not Amplify Transmit
6.5 Continuously Trips Fault Light
6.6 Relay Chatters or Clicks Off and On
6.7 Technical Assistance
6.8 Ordering Parts
7.0 Notes
8.0 Schematic

Table of contents

2