Download Print this page

Power Wheels J8760 Owner's Manual With Assembly Instructions page 26

Advertisement

N
problem
Sometimes the vehicle doesn't
run, but other times it does
When the button on the handlebar
is pressed, the vehicle won't run
without a push
Battery's thermal fuse constantly
"trips", but the vehicle is not
overloaded nor the driving
conditions too severe
Loud clacking or grinding
noise from a motor-gearbox
Charger gets warm during use
Battery makes a sizzling or
gurgling noise when charging

e problems and solutIons guIde
possIble cause
Loose wire or connector
Motor or electrical switch damage
Loose wire or connector
"Dead Spot" on motor
Damaged battery
Broken gears
It is normal for some chargers to get
warm during use and is not reason
for concern. Some chargers do not
get warm during use.
It is normal for some batteries to
make noise and swell slightly while
charging and is not reason for concern.
solutIon
Check all wires around the motors and all connectors to
make sure they are tight.
Contact Power Wheels
Consumer Relations.
®
Check all wires around the motors and all connectors
to make sure they are tight.
Contact Power Wheels
Consumer Relations.
®
Contact Power Wheels
Consumer Relations.
®
Contact Power Wheels
Consumer Relations.
®
No action required.
If your charger does not get warm during use, it does
not mean that it is not working properly.
No action required.
If your battery does not make noise or swell slightly
during charging, it does not mean that it is not
accepting the charge.
J8760pr-0721

Advertisement

loading