Table of Contents
Advertisement
Switch Housing
Screw two (2) housing assembly screws
from the
hardware bag halfway into
the motor housing. It does not matter
which two screw holes you choose.
Feed the wire plug through the center
hole of the upper switch housing, then
wrap keyhole slots around the screws and
twist counterclockwise.
13
M0053-01 • 02/22/13 • © Hunter Fan Company
www.HunterFan.com
Insert the third screw, found in
the
hardware bag, into place and then
tighten all three (3) screws.
Make sure the upper switch housing is securely
attached to the mounting plate. Failure to properly
secure all 3 assembly screws could result in the switch
housing ixture falling.
1.888.830.1326
Advertisement
Table of Contents
