Table of Contents
Advertisement
Blades
www.HunterFan.com
1.888.830.1326
Remember the screws that
you kept after removing the
shipping blocks (page 6)? You
need them for this step.
Insert grommets found in the
hardware
Lightly attach the blade irons to the
bag into the holes in the blades, then
motor with the blade iron armature
secure each blade to a blade iron with
screws, then securely tighten after both
screws found in the
hardware bag.
screws are attached.
Your blades are shielded with Dust Armor® which
is a nanotechnology coating that repels dust. For
cleaning the fan, use soft brushes or cloths to prevent
scratching. Cleaning agents may damage the inishes.
12
M0053-01 • 02/22/13 • © Hunter Fan Company
Advertisement
Table of Contents
