DFI P5XV3 User Manual page 45

CPU Internal Cache and External Cache
These categories speed up the memory access. The default value
is enabled. Enable the External Cache for better performance.
Quick Power On Self Test
This category speeds up Power On Self Test (POST) after you
power on your system. When Enabled, the BIOS will shorten or
skip some check items during POST.
Boot Sequence
This category determines which drive to search first for the disk
operating system. The default is A, C, SCSI. The options are:
A, C, SCSI; C, A, SCSI;
D, A, SCSI; E, A, SCSI;
SCSI, C, A; C only;
Swap Floppy Drive
When this option is enabled and the system is booting from the
floppy drive, the system will boot from drive B instead of drive A.
When this option is disabled and the system is booting from the
floppy drive, the system will boot from drive A. You must have two
floppy drives to use this function.
Boot Up Floppy Seek
When enabled, the BIOS will check whether the floppy disk drive
installed is 40 or 80 tracks. Note that the BIOS cannot distinguish
between 720K, 1.2M, 1.44M and 2.88M drive types as they are all
80 tracks. When disabled, the BIOS will not search for the type of
floppy disk drive by track number. Note that there will not be any
warning message if the drive installed is 360KB.
Boot Up NumLock Status
This allows you to determine the default state of the numeric
keypad. By default, the system boots up with NumLock on wherein
the function of the numeric keypad is the number keys. When set
to Off, the function of the numeric keypad is the arrow keys.
Award BIOS Setup Utility
C, CDROM, A; CDROM, C, A;
F, A, SCSI; SCSI, A, C;
LS120/ZIP, C.
3
45