DFI P5XV3 User Manual page 34

2
P5XV3 System Board User's Manual
2.2.5.8 CPU Fan Connector
The processor must be kept cool by using a fan with heatsink.
Connect the CPU fan to the 3-pin fan connector at location J6 on
the system board.
2.2.5.9 AGP Fan Connector
The system board is equipped with an AGP fan connector. If the
system board is installed with an AGP add-on card and you wish
to install a fan on the add-on card, connect the fan's connector to
location J3 on the system board. Refer to the add-on card's
manual for instructions on installing the fan.
Pin
1
2
3
34
Pin
Function
GND
+12V
Sense
Function
1 GND
2 +12V
3 Sense