Changing The Way You Are Warned; Updating Locations For Danger Zones - TomTom START User Manual

While you are driving in a zone your distance to the end of the zone is shown in the route bar.

To change the way you are warned
Menu.
When you first start using your device, warning sounds are played for these types of zones:
Symbol shown on
map

Changing the way you are warned

To change the way you are warned about danger zones, select the Sounds and Warnings button in
the Settings menu.
You can change settings for whether you want to be warned or not.
For example, to change how you are warned when you approach a danger zone, do the following:
1. Select Sounds & Warnings in the Settings Menu.
2. Select Hazards.
3. Select Danger zones.
4. Select one of the following warning options:
Always.

Only when speeding.

Never.

5. Select the back button.
Tip: To turn off all audible warnings, select Settings, followed by Sounds & Warnings and then
switch off Warning sounds.

Updating locations for danger zones

The locations of danger zones can change frequently. New zones can also appear without warning.
Your new TomTom START comes pre-loaded with zone locations. To keep these zones up-to-date,
connect your START to TomTom
about danger zones, select Sounds & Warnings in the Settings
Symbol shown in
route bar
MyDrive frequently.
Description
Danger zone - this type of warning is only given in
France.
You are warned at the start and end of the danger
zone.
Traffic jams - warnings are given in the route bar
for traffic jams.
83