Switching on and off .......................... 6 Setting up............................6 GPS reception ............................. 6 Device not starting ..........................6 Sharing information with TomTom ....................7 Take care of your device ........................7 The memory card About your memory card ........................9 Inserting your memory card ......................
Page 3
Driving View Symbols ........................26 Advanced lane guidance About lane guidance ........................27 Using lane guidance ......................... 27 Changing your route Making changes to your route ......................29 Change route menu .......................... 29 About waypoints ..........................30 Adding the first waypoint to your route ..................31 Adding further waypoints to your route ..................
Page 4
Reset factory settings ........................46 Planning settings ..........................47 Safety settings ..........................48 Show POI on map ..........................48 Status bar ............................48 Maps..............................49 Turn off voice guidance / Turn on voice guidance ................. 49 Units ..............................49 Version information .......................... 50 Voices ..............................
Page 5
Types of fixed speed camera you can report ................. 73 Speed Enforcement Zone warnings ....................73 Speed Cameras menu ........................74 TomTom HOME About TomTom HOME ........................76 Installing TomTom HOME ........................ 76 MyTomTom account ........................77 Updating your device ........................77 Introducing HOME help ........................
Answer the questions by tapping the screen. GPS reception When you first start your Mazda NB1 navigation device, the device may need a few minutes to determine your GPS position and show your current position on the map. In the future, your posi- tion will be found much faster, usually within a few seconds.
MyTomTom account name, are sent to TomTom and kept together with your MyTomTom account. TomTom then uses your information to improve its maps and speed cameras. If you no longer allow sharing of information, none of the above information is sent to TomTom and information previously stored on your device is deleted.
Page 8
Do not open the casing of your device under any circumstances. Doing so may be dangerous and will void the warranty. Important: If you sell your car, you should remove all personal information from your navigation device first. To remove your personal information, tap Settings and then tap Reset factory set- tings.
60 day period, and you are only entitled to one free map download. Inserting your memory card To insert your memory card into your Mazda NB1 in your car, do the following: 1. Switch off the ignition in the car so that the navigation system is switched off.
8. Once the installation is complete click Finish. Initialising your memory card To use a new or empty memory card with TomTom HOME, it needs to be initialized so that HOME can detect it. To initialize your card, do the following: 1.
Backing up your navigation device The easiest way to make a backup of all the contents of your TomTom navigation device is by using TomTom HOME. You can make one backup per device and store it on your computer.
Page 12
To see where HOME saves your backups do one of the following: Windows: Click Tools > TomTom HOME Preferences and then select the Folder Preferences tab. Mac: Click TomTom HOME > Preferences... and then select the Folder Preferences tab. To restore a backup, click Back up and restore in the HOME menu and then click Restore my de-...
Safety Notice Some navigation devices contain a GSM/GPRS module which can interfere with electrical devices such as cardiac pacemakers, hearing aids and aviation equipment. Interference with these devices may endanger the health or life of you or others. If your device includes a GSM/GPRS module, do not use it near unprotected electrical units or in areas where the use of mobile telephones is prohibited, such as hospitals and aircraft.
Important: In the interest of safety and to reduce distractions while you are driving, you should always plan a route before you start driving. To plan a route on your Mazda NB1, do the following: 1. Tap the screen to open the Main Menu.
Page 15
5. Enter the street name. Streets with similar names are shown in the list while you type. When the correct street name appears in the list, tap the name to select the destination. 6. Enter the house number, then tap Done. 7.
If you have HD Traffic or an RDS-TMC receiver, the route summary also shows traffic information about delays on your route. Note: To use a TomTom traffic information service, you may need a subscription or a receiver. Traffic services are not supported in all countries or regions. For more information, visit...
Using arrival times When you plan a route, your Mazda NB1 asks you if you need to arrive at a particular time. Tap YES to enter a preferred arrival time. Your Mazda NB1 calculates your arrival time and shows you whether you will arrive on time.
Tap this button to enter a destination using latitude and longitude values. Latitude Longitude Planning a route in advance You can use your Mazda NB1 to plan a route in advance, selecting your starting point and your destination. Here are some more reasons to plan a route in advance: Find out how long a trip is going to take before you start.
6. Choose the date and time that you will make the trip you are planning. Your Mazda NB1 uses IQ Routes to work out the best possible route at that time. This is useful to see how long a trip takes at different times of the day or on different days of the week.
Page 20
Note: This button is only shown if your device has either a traffic sub- scription or an RDS-TMC Receiver. Traffic information is not available Show traffic on in all countries or regions. For more information about TomTom traffic route information services, go to tomtom.com/services.
About navigation device voice control Note: Voice control is not supported on all devices or in all languages. Instead of tapping the screen to control your Mazda NB1, you can use your voice to control your Mazda NB1. For example, to increase the volume on your Mazda NB1, you can say, "Increase volume" or "Vol- ume 50%."...
2. When you hear "Say a command" followed by a tone, say a command of your choice. For example, you can say "Drive home." Your Mazda NB1 is only ready to listen after your hear the tone. While you are speaking the microphone monitor shows how well the device can hear your voice: A green bar means the device can hear your voice.
To change the search area for addresses, tap Settings in the Main menu then tap Voice control and then tap Set address search area. Your Mazda NB1 starts to guide you to your destination, using spoken instructions and on-screen directions.
Page 24
Quick Menu on the Driving View. To do this, tap Make your own menu in the Settings menu and then tap Drive to spoken address. Your Mazda NB1 recognizes places and street names when they are spoken in the local lan- guage using local pronunciation.
The Driving View About the Driving View When your Mazda NB1 navigation device starts for the first time, you are shown the Driving View along with detailed information about your current position. Tap the center of the screen at any time to open the Main Menu.
9. Navigation instruction for the road ahead and the distance to the next instruction. If the second instruction is less that 150m after the first instruction, you see it shown immediately instead of the distance. Tap this part of the status bar to repeat the last voice instruction and to change the volume. You can also tap here to mute the sound.
About lane guidance Note: Lane guidance is not available for all junctions or in all countries. Your Mazda NB1 helps you prepare for highway exits and junctions by showing the correct driving lane for your planned route. As you approach an exit or junction, the lane you need is shown on the screen.
Page 28
Tip: If no lane guidance is shown in the status bar and all lanes are highlighted, you can use any lane.
Tap this button while driving on a planned route to avoid a roadblock or traffic congestion on the road ahead. Your Mazda NB1 will suggest a new route which avoids the roads on your current route for the selected distance.
You are shown a list of the street names on your route. When you tap one of the street names, your Mazda NB1 calculates a detour to avoid the selected street. The route summary shows both the new route and your Avoid part of route original route.
Waypoints without notification - a waypoint that you are using to help guide your route, for example, you want to travel from Amsterdam to Rotterdam using a certain highway. You are not notified when nearing the waypoint. Adding the first waypoint to your route To add the first waypoint to your route, do the following: 1.
Changing the order of waypoints Waypoints are automatically added in an optimized order but you can still change the order man- ually if you need to. To change the order of waypoints, do the following: 1. Tap the screen to bring up the Main menu. 2.
The notification setting changes for your waypoint and you are immediately returned to your list of waypoints. Tip: If a waypoint has already been visited, you cannot switch notification on or off. Reactivating a waypoint Note: You can only reactivate a waypoint that has already been visited. Visited waypoints are grayed out.
When traffic information is shown on the map, POIs and Favorites are not shown. Note: To use a TomTom traffic information service, you may need a subscription. Traffic ser- vices are not supported in all countries or regions. For more information, visit tomtom.com/services.
Traffic - select this option to show traffic information on the map. When traffic information is shown, POIs and Favorites are not shown. Note: To use a TomTom traffic information service, you may need a subscription. Traffic ser- vices are not supported in all countries or regions. For more information, visit tomtom.com/services.
Tap this button to make a map correction for the cursor position on the map. You can make the correction only on your own map or you can share the correction with the TomTom Map Share community. Correct location Tap this button to create a Favorite at the cursor position on the map.
Page 37
Tap this button to center the map on the cursor position. Center on map...
To make corrections to your own map, tap Map corrections in the Settings menu. Note: Map Share is not available in all regions. For more information, go to tomtom.com/mapshare. Correcting a map error Important: For safety reasons, do not enter the full details of a map correction while you are driv- ing.
Page 39
select a street by name, a street near your Home location or a street on the map. 3. Select the street or section of a street you want to correct by tapping it on the map. The street you select is highlighted and the cursor shows the name of the street.
Page 40
Tap this button to change and report incorrect road turn restrictions. Change turn re- strictions Tap this button to change and report the road speed limit. Change road speed Tap this button to add or remove a rotary. Add or remove rotary Tap this button to add a new Point of Interest (POI).
Page 41
Tap this button to correct the location of a house number. Enter the ad- dress that you wish to correct and then indicate on the map the correct location of that house number. Correct house number Tap this button to edit an existing street. Once you have selected the street, you can select an error to report.
English voice can read and pronounce French street names. Selecting a voice To select a different voice on your Mazda NB1, either tap Change voice in the Settings menu or tap Voices, then tap Change voice and select the required voice.
Settings About Settings You can change the way your Mazda NB1 looks and behaves. Most of the settings on your device can be accessed by tapping Settings in the Main menu. 2D/3D settings Tap this button to set the default view of the map. To switch between 2D and 3D views while driving, tap the center part of the status bar in Driv- ing View.
preview of your destination is shown during route planning. Enable automatic zooming in 2D view Enable automatic zooming in 3D view Show lane images - when this setting is selected, a graphical view of the road ahead shows which lane you need when you approach a junction or highway exit.
To view or change an existing Favorite, tap one of the items in the list. To see more Favorites on the map, tap the left or right buttons. Keyboard Tap this button to select the keyboards that will be available for your use and the layout of the Latin keyboard.
Tap this button to manage your own Point of Interest (POI) categories and locations. You can set your Mazda NB1 to let you know when you are near to se- lected POI locations. For example, you could set the device to let you Manage POIs know when you are approaching a gas station.
TomTom traffic information services, go to tomtom.com/services. Set whether you want your Mazda NB1 to replan the current route if a faster route is found while you are driving. This is useful if traffic builds up or clears further ahead on your route. Choose...
Toll road, ferry, carpool lanes and unpaved road settings Set how your Mazda NB1 should manage each of these four road features when the device calcu- lates a route. Carpool lanes are sometimes known as High Occupancy Vehicle Lanes and are not present in every country.
Tap this button to switch on voice guidance and hear spoken route in- structions. Turn on Voice guidance Units Tap this button to set the units used on your Mazda NB1 for features such as route planning. Units...
Version information Tap this button to find technical information on your Mazda NB1, such as the device serial number, application version and the map version. You can also view the current status for GPS reception. Version infor- mation Voices Tap this button to disable or enable voice control and find out what to say.
Gas stations Creating POIs Tip: For help on managing third party POIs, search for "Third party POIs" at: tomtom.com/support. 1. Tap the screen to open the Main menu. 2. Tap Settings. 3. Tap Manage POIs. 4. If there are no POI categories or the one you want to use does not exist, tap Add POI category and create a new category.
Page 52
Tap this button to create a POI from a Favorite. You might want to create a POI from a Favorite because you can only create a limited number of Favorites. If you want to create more Fa- vorites you need to delete some Favorites. To avoid losing a Favorite, Favorite save the location as a POI before you delete the Favorite.
3. Tap POI in city. Tip: The last POI you viewed on your Mazda NB1 is also shown in the menu. 4. Enter the name of the town or city and select it when it is shown in the list.
Many of the POIs on your Mazda NB1 include phone numbers. This means that you can use your Mazda NB1 to find out the phone number for a POI, call them using a phone and then plan a route to the location of the POI.
Tap Manage POIs to manage your POI categories and locations. You can set your Mazda NB1 to let you know when you are near to selected POI locations. In this way you could, for example, set the device to let you know you when you are approaching a gas station.
4. Select the type of service you require, for example, Nearest hospital. 5. Select a center from the list; the nearest is shown at the top of the list. Your Mazda NB1 shows a description of the location. 6. To navigate your way to the center by car, tap Navigate there.
Page 57
Tap this button to read a selection of guides, including a First Aid guide. Safety and other guides Tap this button to read a selection of guides relating to your navigation device. You can also access on-device help using this button. Product manuals...
Favorites About Favorites Favorites provide an easy way to select a location without the need to enter the address. They do not need to be favorite places, they can simply be seen as a collection of useful addresses. Creating a Favorite To create a Favorite, do the following: 1.
Tap this button to create a Favorite by saying the address. Spoken address Your Mazda NB1 suggests a name for your new Favorite. To enter a new name, there is no need to delete the suggested name, you just start typing.
Changing the name of a Favorite To change the name of a Favorite, do the following: 1. Tap the screen to bring up the Main menu. 2. Tap Settings to open the Settings menu. 3. Tap Favorites. 4. Tap the Favorite you want to rename. Tip: Use the left and right arrows to choose another Favorite from your list.
Using traffic information If you are using an RDS-TMC receiver to view TMC traffic information on your Mazda NB1, no connections need to be made as the receiver is built into your device.
Your Mazda NB1 regularly looks for a faster route to your destination. If the traffic situation chang- es and a faster route is found, your Mazda NB1 will offer to replan your trip so you can use the faster route.
4. Choose between always taking the faster route automatically, being asked or never changing your route. 5. Tap Next and then Done. 6. Tap Minimize delays. Your device plans the quickest route to your destination. The new route may include traffic de- lays and may remain the same as the original route.
Note: The home location you set here is not the same as the home location you can set in the Settings Menu. In addition, the locations you use here do not have to be your actual home and work locations. If there is another route that you often travel, you can set Work/Home to use these locations instead.
Tap the left and right arrow buttons to move through each incident in turn, viewing the details of each one. This includes the type of incident, for example road works, and the length of delay caused by this incident. You can also access the details about individual incidents by tapping View map in the Main Menu and then tapping on the traffic incident symbol.
Changing traffic settings Use the Traffic settings button to choose how traffic information works on your navigation device. 1. Tap the traffic sidebar then tap Options to open the Traffic menu. 2. Tap Traffic settings. 3. To hear a beep sound when a new traffic incident occurs on your route, select Report if traffic on route changes and then tap Done.
Traffic incident Traffic jam Weather related symbols: Rain Wind Snow Note: The incident avoided symbol is shown for any traffic incident that you avoid using a traffic service. Traffic menu To open the Traffic menu, tap the Traffic sidebar in the Driving View then tap Options, or tap Traf- fic in the Services menu.
Page 68
Change Traffic settings Tap this button to hear spoken information about traffic incidents on your route. Note: Your TomTom device must have a voice that speaks street Read aloud traffic names installed to read information aloud. info...
Speed Cameras Important Important: When you purchase your car with its Mazda NB1, alerts for Speed Cameras are switched off. If you wish to receive alerts for speed camera locations, tap Services, then tap Speed Cameras. Tap Enable alerts. You then receive alerts for speed camera locations.
Changing the way you are warned To change the way your Mazda NB1 warns you about speed cameras, tap the Alert settings button. You can then set how close you want to be to a speed camera before you are warned and what type of sound will be played.
Toll booth camera Restricted road camera - located on a minor road that reduces traffic on a larger road Other cameras Speed trap hotspot Speed Enforcement Zone Accident black spot Bi-directional speed camera Ungated railroad crossing Report button To show the report button in the Driving View, do the following: 1.
The report button is shown on left-hand side of the Driving View or, if you are already using the quick menu, it's added to the buttons available in the quick menu. Tip: To hide the report button, tap Disable report button in the Speed Cameras menu. Reporting a new speed camera while on the move To report a speed camera on the move, do the following: 1.
Types of fixed speed camera you can report When you report a fixed speed camera, you can select the type of fixed camera you are reporting. These are the different types of fixed speed camera: This type of speed camera checks the speed of passing vehicles. Speed Camera This type of camera checks for vehicles breaking traffic rules at traffic lights.
Start of zone warning As you approach the start of a Speed Enforcement Zone, you see a visu- al warning in the top left hand corner of the Driving View with a distance to the camera underneath it. You hear an audible warning. You also see a small icon on the road showing the position of the speed enforcement zone camera at the start of the zone.
Page 75
Tap this button to set the alerts you will receive and the sounds used for each alert. Alert settings Tap this button to disable alerts. Disable alerts Tap this button to enable the report button. The report button is shown in the Driving View or in the quick menu.
Download updates for your device for free, including Map Share updates and other services included with your product. Add new items to your device, like maps, voices and POIs, as well as buy TomTom services and manage your subscriptions.
age newsletter subscriptions and language preferences for product news Support - click My Questions on the TomTom website to track and view your case history and all email conversations you have with TomTom about technical support issues via the website.
Introducing HOME help In the TomTom HOME Help topics you can find a lot more information about how HOME can help you to manage contents and services on your navigation device. You can also get help on the following: Initializing a memory card ...
You can get further help by going to tomtom.com/support. Status & information Tap this button to view technical information about your device, such as the serial number for your device and the version of the main TomTom application. Version infor- mation Tap this button to see the current status for GPS reception.
TomTom device. TomTom does not accept any liability for the availability and accuracy of GPS. Use with care Use of a TomTom device for navigation still means that you need to drive with due care and atten- tion. Aircraft and hospitals Use of devices with an antenna is prohibited on most aircraft, in many hospitals and in many other locations.
Page 81
TomTom, the FCC may withdraw the user’s right to operate the equipment. For customers in the USA, the following booklet prepared by the Federal Communications Commission may be of help: "How to Identify and Resolve Radio-TV Interference Problems."...
Page 82
This device must accept any interference received, including interference that may cause unde- sired operation. Responsible party in North America TomTom, Inc., 150 Baker Avenue Extension, Concord, MA 01742 Tel: 866 486-6866 option 1 (1-866-4-TomTom) Emissions information for Canada Operation is subject to the following two conditions: This device may not cause interference.
Page 83
The information in this document is subject to change without notice. TomTom shall not be liable for technical or editorial errors or omissions contained herein, nor for incidental or consequential damages resulting from the performance or use of this document. This document contains information protected by copyright.
TomTom or its suppliers. The use of this material is subject to the terms of a license agreement. Any unauthorized copying or disclosure of this material will lead to criminal and civil liabilities.
Need help?
Do you have a question about the Mazda NB1 and is the answer not in the manual?
Questions and answers