Remote Control Button - Panasonic CS-PC12QKH Service Manual

15.2 Remote Control Button

15.2.1 SET Button

To check current remote control transmission code and store the transmission code to EEPROM:
Press "Set" button for more than 10 seconds by using pointer
o
Press "Timer Set" button until a "beep" sound is heard as confirmation of transmission code change
o
15.2.2 RESET

To clear and restore the remote control setting to factory default.
Press once to clear the memory
o
15.2.3 TIMER ▲

To change indoor unit indicators' intensity:
Press continuously for 5 seconds
o
15.2.4 TIMER ▼

To change remote control display from Degree Celsius (°C) to Degree Fahrenheit (°F)
Press continuously for 10 seconds
o
15.2.5 TEMP

To change remote control set temperature range from 16°C ~ 30°C (60°F ~ 86°F) to 20°C ~ 30°C (68°F ~ 86°F).
Press continuously for 15 seconds.
o
69