Automatic Power Off - Kenwood TH-26A Instruction Manual

• Timing chart
ON
O FF n
L - -_ _
-..Jn
n
I
I
I
1S0mS
800mS
When OTSS function is ON.
ON OFF
IULJl
I ,
I I
150mS l OOmS
4-10. AUTOMATIC POWER OFF
This transceiver also provides an Automatic Power OFF
circuit. The circuit action is described below. (Initial
state is ON.)
1. A 5 second audio confirmation alert will sound after
59 minutes if no signal has been received and if you
have not performed any operation.
2. 1 minute after this alert signal the transceiver will
shut itself off except for enough power to show
"APO" in the display.
3. When the APO operates and the transceiver is shut
off after 60 minutes, the transceiver can be
reactivated by pressing the MONI switch, or by
turning the POWER switch OFF and back ON.
4. To turn the APO function OFF / ON , press the CALL key
while turning on the POWER switch.
Note
The function can not be activated during scan or
Tone Alert system operation.
To conserve battery life even more simply turn the
transceiver OFF when you are not using it.
37