Kenwood TH-26A Instruction Manual page 14

If you press and hold this key while you turn on the
POWER switch you will be able to turn the BAITERY
SAVER function ON or OFF.
@)Tuning control
Rotate this control clockwise to increase the frequency
and counterclockwise to decrease the frequency.
This control is also used to select the desired memory
channel and the scan direction.
LCD display
CD-
B
+
6
- + -- - { 7
~+---f8
Displays the selected transmitter offset direction. When
neither indicator is ON the transceiver is in the Simplex
mode. When both indicators are ON the transceiver is in
the Split Channel mode.
~
R indicator
14
This indicator is ON when the Reverse function is on.
@DTSS indicator
This indicator is ON when the DTSS function is active.
@CTCSS indicator
T: This indicator is ON when the Tone Encode
function is active.
CTCSS : This indicator is ON when the Tone Decode
function is active.
([)T. ALT indicator
This indicator is ON when the Tone Alert system is
active. The indicator will flash when a signal is received .
®Memory channel indicator
This indicator is used to show the selected memory
channe l number.
CDMemory indicator
This indicator lights during Memory Recall mode, and
flashes during Memory entry.
@F indicator
ON whenever the F key has been depressed.
@* indicator
This indicator is ON when the displayed memory
channel will be skipped during memory scan
operations.
@)500 Hz dot
This indicator show 500 Hz.
® Hz dot
This indicator lights during CTCSS frequency selection,
and is used to show the 1 Hz digit.
This indicator is also ON when the Battery Saver and
Automatic Power Off function have been canceled.