Kenwood TH-26A Instruction Manual page 18

press this key. You must press the desired 2nd function
key before the indicator turns off.
@TONE / CTCSS key
Pressing this key by itself causes the radio to select the
desired tone signaling mode. When the "T" indicator is
illuminated in the display the transceiver will transmit
the selected subaudible tone. When the "CTCSS"
indicator is illuminated the transceiver will both
transmit the subaudible tone and will also remain
squelched until the proper subaudible tone is received.
TONE frequency selection
Pressing the key within 10 seconds of pressing the F key
will allow you to select the desired tone frequency. The
display will indicate the current Tone frequency. To
change to a different tone frequency rotate the Tuning
control until the desired tone frequency appears in the
display.
Press this key while turning on the power to select the
mode for the REMOTE CONTROL MICROPHONE (SMC-
33) switch.
@SHIFTkey
This key is used to select the desired transmitter offset
direction. Pressing the key will cause the radio to shift
from one offset direction to the other, i.e.
+
to - to
simplex where no indicator shows. [ - to
Ei
for
European version ]
18
Pressing the key within 10 seconds of pressing the F key
will turn the DTSS function ON or OFF.
Pressing the F key for longer than 1 second and then
pressing the this key will allow you to select a DTSS
code.
If you press and hold this key while you turn on the
POWER switch you will store the currently displayed
data as the ·Iower limit for the programmable VFO
tuning limit function.
@REV key
This key is used to reverse the transmit / receive
frequencies during repeater operations. If you have
selected simplex this key will not function.
PreSSing the F key for longer than 1 second and then
pressing the this key will allow you to change the delay
time when DTSS is being sent out.
If you press and hold this key while you turn on the
POWER switch you will store the currently displayed
data as the upper limit for the programmable VFO
tuning limit function.