The Command Dials - FujiFilm X100F Owner's Manual

Parts of the Camera

The Command Dials

The Command Dials
Rotate or press the command dials to:
Select menu tabs or page through menus (P 89, 108, 113),
djust exposure compensation or sensitivity (see below),
choose the size of the focus frame (P 73, 74), or view other
pictures during playback without changing the zoom ratio
(P 35, 37).
Switch back and forth between exposure compensation
and sensitivity (see below).
Exposure Compensation and Sensitivity Exposure Compensation and Sensitivity
The front command dial can be used to adjust exposure compensation when C is selected with the exposure
compensation dial, and to adjust sensitivity when the sensitivity dial is set to A and COMMAND is selected for
D BUTTON/DIAL SETTING > ISO DIAL SETTING (A). The center of the front command dial can be used to
switch between exposure compensation and sensitivity when both of the foregoing conditions are met.
Formatting Memory Cards Formatting Memory Cards
The format menu can also be displayed by pressing the center of the rear command dial while pressing and
holding the b button.
6
Front command dial Front command dial
Highlight menu items (P 89, 108, 113), choose the desired
combination of shutter and aperture (program shift;
P 49), choose a shutter speed (P 50, 53), adjust settings
in the quick menu (P 44), choose the size of the fo-
Rotate Rotate
cus frame (P 73, 74), or zoom in or out in full-frame or
thumbnail playback (P 37, 38).
Zoom in on the selected focus area or (in playback mode)
the active focus point. Press and hold to choose the man-
ual focus mode focus display.
Press Press
Rear command dial Rear command dial