Recording Pictures In Raw Format - FujiFilm X100F Owner's Manual

Recording Pictures in RAW Format

Recording Pictures in RAW Format
To record raw, unprocessed data from the camera image sensor, select a RAW option for image quality
in the shooting menu as described below. JPEG copies of RAW images can be created using C PLAY
BACK MENU > RAW CONVERSION, or RAW images can be viewed on a computer using the RAW FILE
CONVERTER EX 2.0 application (P 85, 132).
1 Press MENU/OK in shooting mode to display the shooting menu. Select the H IMAGE QUALITY
SETTING tab (P 89), then highlight IMAGE QUALITY (P 90) and press MENU/OK.
2
Highlight an option and press MENU/OK. Select RAW to record only RAW images, or FINE+RAW or
NORMAL+RAW to record both JPEG copy together with the RAW images. FINE+RAW uses lower
JPEG compression ratios for higher-quality JPEG images, while NORMAL+RAW uses higher JPEG
compression ratios to increase the number of images that can be stored.
The Function Buttons The Function Buttons
To toggle RAW image quality on or off for a single shot, assign RAW to a function button (P 47). If a JPEG option
is currently selected for image quality, pressing the button temporarily selects the equivalent JPEG+RAW option.
If a JPEG+RAW option is currently selected, pressing the button temporarily selects the equivalent JPEG option,
while if RAW is selected, pressing the button temporarily selects FINE. Taking a picture or pressing the button
again restores the previous setting.
84