Attaching Adapter Rings - FujiFilm X100F Owner's Manual

Optional Accessories
J
Lighting: If the unit supports this feature, choose from the
options below.
J
• (FLASH POWER PRIORITY): Gain range by slightly reduc-
ing coverage.
K
• (STANDARD): Match coverage to picture angle.
L
• (EVEN COVERAGE PRIORITY): Slightly increase coverage
for more even lighting.
K
Master: Assign the master fl ash to group A (Gr A), B (Gr B),
or C (Gr C). If OFF is selected, output from the master fl ash
will be held to a level that does not aff ect the fi nal picture.
Available only if the unit is mounted on the camera hot
shoe as a master fl ash for FUJIFILM optical wireless remote
fl ash control in TTL, TTL%, or M mode.
K
Number of fl ashes: Choose the number of times the fl ash
fi res each time the shutter is released in MULTI mode.
L
Channel: Choose the channel used by the master fl ash for
communication with the remote fl ash units. Separate
channels can be used for diff erent fl ash systems or to pre-
vent interference when multiple systems are operating in
close proximity.
L
Frequency: Choose the frequency at which the fl ash fi res
in MULTI mode.
148

Attaching Adapter Rings

Attaching Adapter Rings
1
Remove the front ring.
R R If you have trouble re-
If you have trouble re-
moving the front ring, moving the front ring,
grip the entire ring grip the entire ring
and rotate it as shown. and rotate it as shown.
2
Attach the adapter ring
as shown, with the pro-
jections facing out.
Q Keep the front ring and lens cap in a safe place
when not in use.
Q Attach the adapter ring AR-X100 before attaching
LH-X100 lens hood, PRF-49S protector fi lter, or third-
party fi lters.