Main Menus - Trelock COCKPIT2 FC 525 Manual

5.6 Entering and changing the PIN time
If the bike computer is in Sleep mode and is not 'awakened' for a
set time, it has to be reactivated by entering your PIN. The period
concerned (PIN Time) can be (re)set in the "Set PIN Time" window
– after you have pressed the SET button, you will be asked to
enter your PIN. After correct PIN input, you automatically access
"PIN Time" where you can enter the time of your choice up to max.
240 minutes. If you wish to dispense with the securing of your bike
computer via a PIN, then set the PIN time to "000".
48
5.7 Energy economy function
An energy economy function is linked to the
PIN-time setting.
The PIN-time default setting is 60 min. and
the PIN default setting "0000". As such, the
clock is displayed in Sleep for 60 min., after
which time the clock display shuts down.
This period of time can be adjusted as de-
?
scribed above. If the PIN time is set at 0, the
energy economy function is deactivated and
the clock is displayed on an ongoing basis.
If a PIN is set at "0000" and a PIN time at
more than 0, the energy economy function
and the PIN enquiry are activated. This
means that, once the PIN time has elapsed,
the clock display shuts down and the com-
puter can only be reactivated via PIN input.

6. Main menus

Press the MODE button to move between
the main functions (menus) - see 6.1 - 6.7.
To enter digits (time, counter levels, etc.),
press the MODE button until the given digit
appears. Use the SET button to move to the
next digit and confirm again via SET after the
last digit has been entered.
49