Press this switch upward/downward to change the receive frequency or change search
direction.
2-2 Rear panel
8
Belt clip
Attach the supplied belt clip.
9
Battery compartment cover
3 Connections
Connect the supplied flexible rubber antenna to the SMA antenna connector on the top of
the AR-STV.
If required, an external antenna may be connected with a SMA connector for the coaxial cable.
Insert the supplied 4 AA size Ni-MH cells into the battery compartment in the AR-STV.
If not fully charged, connect an external battery charge into the DC 6V connector.
4. Power switch
To switch on the AR-STV, slide the power switch on the right side of the AR-STV upward.
4-1
Start-up
After inserting the batteries, switch on the power switch. The LCD displays search screen
and a STA (Status) LED will blink indicating the AR-STV is in the search mode.
4-2
Powering down
To switch off the AR-STV, slide down the power switch.
4-3 Low Battery
When internal battery voltage becomes low, the Low Battery indicator will appear on the LCD screen. In the
meantime, a beep will sound.
When this message appears on the screen, all operations of the AR-STV will quit
automatically. Immediately switch off the AR-STV, and replace all internal battery cells with
new ones or charge batteries with an external charger.
5 Operations of the AR-STV
5-1 Display
6