Table of Contents
Advertisement
3. To exit from this setting screen, press and hold the MODE key for 3 seconds.
5-2-2
Memory mode
In the Memory mode, you can change the memory channel setting, record video into memory.
To use this function, a formatted SD memory card (not included) must be inserted in the SD slot.
To go into the Memory mode, press the MODE key and REC key simultaneously.
(If a SD memory card is not in the slot, a beep will sound and "SD Card No File" error message
appears.)
Signal Level
Memory channel
5-2-2-1 Scroll memory channel
To scroll the memory channel, press the FREQ. switch upward or downward.
5-2-2-2 Slide show
To start a slide show of the recorded frequencies, press and hold the FREQ. switch for 3 seconds.
(Entry range:0 ~ 95 %)
Suggested level: 60 (for normal search)
20 (for weak signal)
If the parameter is set to 0, then the AR-STV searches with the noise level
setting.
Memory mode screen
Battery Level
SD Card inside
Memory Mode
I
Receive frequency
10
Advertisement
Table of Contents
