Lenovo thinkcentre m83 User Manual page 88

4. The front fan assembly is attached to the chassis by four rubber mounts. Remove the front fan assembly
by breaking or cutting the rubber mounts and gently pulling the front fan assembly out of the chassis.
Note: The new front fan assembly will have four new rubber mounts attached.
Figure 62. Removing the front fan assembly
5. Remove the front bezel. See "Removing and reinstalling the front bezel" on page 41.
6. Install the new front fan assembly by aligning the new rubber mounts with the corresponding holes in
the chassis and push the rubber mounts through the holes.
76
ThinkCentre M83, M93/p User Guide