Lenovo thinkcentre m83 User Manual page 83

7. To install a new hard disk drive into the blue bracket, flex the bracket and align pin
and pin 4 on the bracket with the corresponding holes in the hard disk drive. Do not touch the circuit
board 5 on the bottom of the hard disk drive.
Figure 55. Installing the hard disk drive into the bracket
8. Slide the new hard disk drive into the bracket until it snaps into position.
Figure 56. Installing the primary hard disk drive
9. Connect the signal cable and the power cable to the new hard disk drive.
What to do next:
• To work with another piece of hardware, go to the appropriate section.
• To complete the installation or replacement, go to "Completing the parts replacement" on page 99.
1 , pin
.
Chapter 5 Installing or replacing hardware
2 , pin 3 ,
71