Yamaha YAS-706 Series Owner's Manual page 60

Network
Problem
The network feature does not function.
"Not connected" is displayed with "Wireless
(Wi-Fi)" configuration; unable to connect to
wireless router (access point).
"Not connected" is displayed with "Wireless
(Wi-Fi)" configuration using the WPS
function ("WPS Button" and "PIN Code") and
"Access Point Scan"; unable to connect to
wireless router (access point).
"Not connected" is displayed with "Wireless
(Wi-Fi)" configuration using the WPS
function ("WPS Button" and "PIN Code");
unable to connect to wireless router (access
point).
Playback stops unexpectedly and files
cannot be played continuously.
The unit does not detect the PC.
The files in the PC cannot be viewed or
played back.
Cause
The network parameters (IP address) have not been obtained properly.
The wireless router's MAC address filter is enabled.
The wireless router (access point) does not broadcast its SSID.
The wireless router (access point) uses WEP encryption.
The folder contains some files that cannot be played via the unit.
The media sharing setting is not correct.
Some security software installed on your PC is blocking the access of
the unit to your PC.
The unit and PC are not in the same network.
The MAC address filter is enabled on the unit.
The files are not supported by the unit or the media server.
Remedy
Enable the DHCP server function on your router and set "DHCP" in the setup
menu to "On" on the unit (p. 48). If you want to configure the network
parameters manually, check that you are using an IP address which is not
used by other network devices in your network.
A connection cannot be established if the wireless router's MAC address filter
is enabled. Check wireless router (access point) settings and try a different
connection method (p. 48).
A connection cannot be established if the wireless router (access point) is
configured so that it does not broadcast its SSID. Check wireless router
(access point) settings and try a different connection method (p. 31, 36).
A connection cannot be established using the WPS function. Try a different
connection method (p. 31, 36).
Delete or move files (including video or hidden files) that cannot be played via
the unit from the folder.
Configure the sharing setting and select the unit as a device to which music
contents are shared (p. 39).
Check the settings of security software installed on your PC.
Check the network connections of the unit and PC, and then connect the unit
and the PC to the same network.
In "MAC Address Filter" in the setup menu, disable the MAC address filter or
specify the MAC address of your PC to allow it to access to the unit (p. 48).
Use the file format supported by both the unit and the media server (p. 39).
APPENDIX ➤ Troubleshooting
60
En