Yamaha YAS-706 Series Owner's Manual page 27

Wireless network connections
Connect the unit to a wireless router (access point) to use a network.
Refer to the following for instructions on connecting to a wireless router (access point).
• Using the MusicCast CONTROLLER app (p. 27)
• Using connection methods other than the MusicCast CONTROLLER app (p. 30 to 36)
Internet
Modem
Mobile device
The indicator on the unit glows when the unit is connected to a wireless network.
NOTE
• You cannot use the wireless network connection simultaneously with the wired network connection or
Wireless Direct (p. 37).
• If the unit and the wireless router (access point) are too far apart, the unit may not connect to a wireless
router (access point). In such case, place them close to each other.
HINT
• If the unit will not be connected to a wireless router (access point), Wireless Direct (p. 37) can be used to
connect the unit directly to a mobile device to control the unit using the MusicCast CONTROLLER app
installed on that mobile device.
Wireless router (access point)
Green
Connecting with the MusicCast CONTROLLER app
(registering the unit as a MusicCast-enabled device)
Install the MusicCast CONTROLLER app on your mobile device to connect the unit to a
network and register it as a MusicCast-enabled device.
HINT
• Confirm that your mobile device is connected to your home router before beginning.
• This section uses MusicCast CONTROLLER app screens displayed in English on an iPhone as examples.
• MusicCast CONTROLLER app screens and menu labels are subject to change without prior notice.
1
Install the MusicCast CONTROLLER app on your mobile device, and
open the app.
Search for "MusicCast CONTROLLER" on the App Store or Google Play.
2
Tap "Setup".
NETWORKS ➤ Connecting to a network
27
En