Yamaha YAS-706 Series Owner's Manual page 35

10
Use the / keys to select "Security" and the
keys to select the encryption method.
Settings
None, WEP, WPA2-PSK (AES), Mixed Mode
NOTE
• As communications are not encrypted when "None" is selected, selecting
this option poses the risk that third parties may access the unit without your
permission.
11
Use the / keys to select "Security Key" and
press the ENTER key.
HINT
• If you select "None" in step 10, this item is not available.
12
Use the / / /
security key.
/ / /
If you select "WEP" in step 10, enter either 5 or 13 character
ENTER
string, or 10 or 26 hexadecimal (base 16) keys.
If you select the method other than "WEP", enter either 8 to 63
SETUP
character string, or 64 hexadecimal (base 16) keys.
HINT
• Hexadecimal (base 16) keys use combinations of the numbers 0 through 9
and the letters a through f. Letters are not case sensitive.
[ ]/[ ]: Move the cursor left and right.
[Space]: Enter a space.
[BKSP]: Delete the character to the left of the selected one.
[DELETE]: Delete the selected character.
[CLEAR]: Delete all characters entered.
[CANCEL]: Cancel character entry, and return to the previous screen.
Once the security key been entered, select "OK", and then
press the ENTER key. The screen will return to that displayed
in step 8.
/
and ENTER keys to enter the
13
Use the / keys to select "Connect" and press
the ENTER key to start the connection process.
When a connection has been established, "Completed" will be
displayed on the TV screen.
If "Not connected" is displayed, press the ENTER key to repeat
the procedure beginning with step 6.
14
Press the SETUP key to exit the setup menu.
NETWORKS ➤ Connecting to a network
35
En