•
Unscrew and take out the measuring cap-dipstick «1».
•
Clean the area in contact with oil with a clean cloth.
•
Place without screwing the cap-dipstick «1» into its tube «2».
•
Remove the cap-dipstick «1» again and read the level the oil reaches on the
dipstick.
•
The level is correct when it is close to the MAX level marked on the measuring
dipstick.
04_01
04_02
•
Top-up if necessary.
CAUTION
IN ORDER TO AVOID DAMAGING THE ENGINE, OIL LEVEL MUST NEVER EX-
CEED THE «MAX» MARK OR FALL BELOW THE «MIN» MARK.
56