Tuning And Operation - Aleko AC1400 User Manual

AC1400 SLIDING GATE OPERATOR
15. Output power supply: +12V (DC +12V), COM (CO)，DET (Loop detector), I.R. (Infrared
N.C)
COM
Out
GND
+12V
Infrared
Infrared with DC input
COM
Out
GND
+12V
Loop detector
Loop detector with DC input
16. Beeper: DC12V
17. Learn button: AN
18. Dip-switch
19. Antenna: ANT

8. Tuning and operation

Remote control
To add extra remote controls (Learning): Press the button 'AN' (See control board
scheme No.17) on the control board, then the 'LED2' will be on and turn off, the beeper
will ring about 1 second, then press the remote control button which you want to use, the
beeper will ring about 2 seconds and the 'LED2' will turns on about 2 seconds and then
turns off. The learning process is finished.
Up to 100 remote controls may be used.
COM
I.R
Terminal
COM
X8, No.15
+12V
Control board
COM
DET
Terminal
COM
X8, No.15
+12V
Control board
Schematic diagram
Button 3
Fig.8
10
COM
Out
AC24V
Infrared
Control board
Infrared with AC input
COM
Out
AC24V
Loop detector
Control board
Loop detector with AC input
Button 1
Button 2
Button 4
COM Terminal
X8, No.15
I.R
Terminal
AC24V
X5,No.11
COM Terminal
X8, No.15
DET
AC24V Terminal
X5,No.11