Adjust Loudspeaker Volume; Transfer An External Call To Another Handset; Switch Between An Internal And External Call - Philips SE630 User Manual

Se630 user's manual
Hide thumbs Also See for SE630:
Table of Contents

Advertisement

v
2.
Press
key again to return to normal mode.
WARNING Activation of loudspeaker can suddenly increase the volume in the earpiece to a very
high level. Make sure the handset is not too close to your ear.

Adjust loudspeaker volume

:
1.
Press
key to select from
Intercom
This feature is only available when there are at least 2 registered handsets. It allows you to make free internal
calls, transfer external calls from one handset to another and use the conference option.
Intercom another handset
To be able to use intercommunication feature, you must have at least 2 handsets registered to your base
station (see page 43 "To register an additional handset").
c
1.
Press
key in stand-by mode.
2.
Intercom is established immediately if there are only 2 registered handsets. If there are more than 2 regis-
tered handsets, the handset numbers which are available for intercom will be displayed. Press
call all the handsets or press the handset number to select a specific handset, e.g. press
handset 2.
If the handset does not belong to keep the same range, this function may not be available.

Transfer an external call to another handset

c
1.
Press
key to put the external call on hold (the caller can no longer hear you).
2.
Intercom is established immediately if there are only 2 registered handsets. If there are more than 2 regis-
tered handsets, the handset numbers which are available for intercom will be displayed. Press
call all the handsets or press the handset number to select a specific handset, e.g. press
handset 2.
The called handset rings.
If there is no answer from the called handset, press
r
3.
Press
key on the called handset to answer the internal call, where both internal callers can talk.
e
4.
Press
key on the first handset to transfer the external call to the called handset.

Switch between an internal and external call

c
1.
Press
key once to switch between an internal call and external call.
Call
Volume 1
to
Volume
5.
c
key to resume the external call.
EN
m
ALL
to
2
to call
m
ALL
to
2
to call
19

Advertisement

Table of Contents
loading

This manual is also suitable for:

Se6302s/79Se6301s/79Se6301s/51

Table of Contents