Table of Contents
Advertisement
EN
Unregistration
To unregister a handset
m
1.
Press
m
press
2.
Enter the Master PIN when prompted and press
3.
Press on the handset keypad the handset number corresponding to the handset that you wish to
unregister.
If there are no key presses within 15 seconds, the unregistration procedure will be aborted and the
handset returns to stand-by mode.
A long confirmation beep is emitted to indicate successful unregistration and the screen shows
Unregistered.
Change Master PIN
The Master PIN is used for setting call barring/baby call number and for registration/unregistration of handsets.
The default Master PIN number is 0000. The length of the PIN is 4 digits. This PIN is also used to protect the
settings of your handset. Your handset will prompt you whenever the PIN is required.
To change Master PIN
m
1.
Press
m
SELECT
2.
Enter the current Master PIN when prompted and press
shown as asterisks (*) on the screen.
If an incorrect PIN is entered,
mode.
If your PIN number is the default 0000, step 2 is skipped.
3.
Enter new PIN and press
4.
Enter new PIN again and press
A confirmation tone is emitted, the message
previous menu.
If the Master PIN is modified, you will be required to enter the Master PIN before you can modify
Call Barring and Baby Call settings.
44
Advanced Settings
:
, scroll
to
Advanced Set
MENU
SELECT
.
:
Advanced Set
MENU
, scroll
to
.
Incorrect Pin
m
OK
.
m
m
and press
m
to confirm.
OK
m
and press
SELECT
m
will be displayed and the screen returns to stand-by
to confirm PIN change.
OK
New PIN Stored
:
, scroll
to
Unregistration
SELECT
:
Change PIN
, scroll
to
OK
to confirm. The PIN entered will be
appears and the screen returns to
and
and press
Advertisement
Table of Contents
