Important Information For your safety Installation requirements Need Help? What’s in the box? Your SE630 Overview of the handset Overview of the base station Main features of your SE630 Connect Install Call Phonebook Call log Clock & Alarm Personal Settings...
The voltage on the network is classified as TNV-3 (Telecommunication Network Voltages), as defined in the standard EN 60-950. Need Help? For more information on troubleshooting and FAQs: Troubleshooting: page 51 Online Help www.p4c.philips.com Important Information...
What’s in the box? The following accessories are included with your SE630: Base station Power supply for Line cord Handset base station Warranty card Battery door Quick Start User Guide 2 AAA Guide rechargeable batteries The line adaptor may not be attached to the line cord. In this case, you have to connect the line adaptor to the line cord first before plugging the line cord to the line socket.
Short press from menu browsing to return to the previous menu. *WARNING Handsfree activation can suddenly increase the volume in the earpiece to a very high level. Make sure the handset is not too close to your ear. Your SE630...
Page 8
The loudspeaker is ON. Alarm clock is activated. Blinks when there is a missed call, or when new SMS or voicemail messages are received and not read yet. Steady when there are received SMS messages in the SMS box. Your SE630...
Paging key Main features of your SE630 The following is an overview of the menu options that are available in your SE630. For detailed explanation of the menu options, please refer to the corresponding sections in this User Guide. Menu...
In this example, the alarm is Once. • To change your selection • To confirm your selection • Return to previous menu level or stand-by screen Your SE630 Action Choose by pressing the MENU key directly below it (left soft...
The location of your base station can have an effect on the range and performance of your SE630 (see TIP below). Connecting the Base Station Place the base station in a central location near the telephone line socket and electricity sockets.
Install battery Your SE630 is supplied with 2 rechargeable batteries allowing approximately up to 12 hours of talk-time and up to 150 hours stand-by time. Before using the handset, the batteries have to be installed and fully charged. Slide out the battery cover.
Configure your SE630 Before you use your SE630, you need to configure it according to the country of use. After charging it for a few minutes, the WELCOME screen appears. Follow these steps to configure your phone: Press any key to display the list of countries.
Please check the date & time settings in your ISDN system or contact your network provider. Now, you are ready to use your phone. Basic operations of your SE630 Make a call Enter the phone number (maximum 24 digits) and press For details, please refer to "Make a call"...
Press four times: Philips By default, the first letter of a word is in upper case. Press lower case. Default settings Ringer Volume Earpiece Volume Speaker Volume Key Beep Wallpaper Contrast Screensaver Auto Pick-up Auto Hang-up Babysit mode Alarm clock...
Make a call Predialling Enter the phone number (maximum 24 digits). Press to dial the number. Direct dialling Press to take the line. Enter the phone number. Call from redial list > Press in stand-by mode. Scroll to an entry in the redial list. Press to dial the number.
Answer a call When the phone rings, press Handsfree answering When the phone rings, press Incoming call has priority over other events. Whenever there is an incoming call, other status in progress such as phone setting, menu navigation, etc will be aborted. TIP If Auto Pick-up station to answer the call.
Press key again to return to normal mode. WARNING Activation of loudspeaker can suddenly increase the volume in the earpiece to a very high level. Make sure the handset is not too close to your ear. Adjust loudspeaker volume Press key to select from Volume 1 Intercom...
Three-party conference call The conference call feature allows one external call to be shared with two handsets (in intercom). The three parties can share the conversation and no network subscription is required. Press to put the external call on hold (the caller can no longer hear you). Intercom is established immediately if there are only 2 registered handsets.
Your SE630 can store up to 250 phonebook memories, including 9 direct access memories ( Each phonebook entry can have a maximum of 24 digits for the phone number and 12 characters for name. Access phonebook Press in stand-by mode or press...
Scroll to choose a group to confirm. SELECT A long confirmation beep tone is emitted. You can assign individual contacts to specific groups of your choice. For example, phone numbers of all your co-workers. You can also assign a specific ring melody to that group (see "Group Melody"...
Page 23
Store direct access memory You can store up to 9 direct access memories (Key mode will automatically dial the stored phone number. Press , scroll MENU press SELECT Select a key (Key 1 9) and press name will be displayed. If there is no number stored for the selected key or if you want to change the number currently stored, press and press...
Slide the SIM card between the retaining clips, microchip facing up, until it stops. Put the SIM card tray back in the slot on the base station and push into place until it latches. On the handset, press from SIM and press Copy All Scroll...
The call log can store up to 50 entries. If you have subscribed to Caller Line Identification (CLI), and provided the identity of the caller is not withheld, the name (or number) of the caller will be displayed together with the date &...
Page 26
View details of a redial list entry > Press in stand-by mode and scroll Press and press SELECT Save redial list entry to phonebook > Press in stand-by mode and scroll Press , scroll SELECT Enter name and press Edit number if necessary and press Enter the SMS Box number and press Scroll to choose a group...
You can create up to 10 SMS boxes Your SE630 can store up to 50 SMS messages (40 SMS in the Inbox and 10 SMS in the Draft box) shared by all the SMS boxes and the maximum length of each message is 160 characters.
Enter the destination phone number and press list to select a phone number, press Enter the destination box number By default, the destination box is 9 (the default destination box depends on the country). Press SELECT and press If you select Send, the message will be sent immediately. been sent successfully.
Page 29
When viewing the message content, you can press Reply Send a reply to the sender of the message. Edit Forward the message to another recipient. Copy to Phbk Save the sender’s number to your phonebook. Delete Delete the selected message. Delete All Delete all messages in the Inbox.
Delete all Inbox messages While viewing the message content, press Scroll Delete All Press SELECT again to confirm deletion. Draft box In addition to SMS messages saved as drafts, all the SMS messages that are not successfully sent will be automatically stored in the Review Draft messages Press...
SELECT SMS settings This menu allows you to set up the server for sending and receiving SMS messages. Your SE630 can receive messages from 3 service centers. Each service center consists of 2 numbers: - Incoming number - Outgoing number The maximum length of an incoming/outgoing number is 24 digits.
Page 32
To set outgoing number The incoming and outgoing numbers of your SE630 are already set to work on your country network. We advise you not to modify these settings. For more details or in case of any problems, please contact your local network provider.
Enter the number and press A confirmation beep is emitted. The maximum length of an outgoing number is 24 digits. To set incoming number Press , press MENU scroll SMS Center SMS Center 2 Incoming Nr. Scroll and press Enter the number and press A confirmation beep is emitted.
Set date and time Press MENU , scroll Date/Time. Enter the current time (HH:MM) and current date (DD/MM/YY) and press Enter the date in Day/Month/Year format and the time in 24-hour format. A confirmation beep is emitted and the screen returns to Once the date and time are set, there will be time &...
Personal Settings Handset Tones Ring Volume There are 5 ringer volume options (Silence, Low, Medium, To set ring volume Press MENU , scroll Handset Tones and press Scroll to your desired volume level and press A confirmation beep is emitted and the screen returns to previous menu. When Silence is activated, the icon...
Press SELECT to set the ring melody. A confirmation beep is emitted and the screen returns to previous menu. Group Melody To benefit from this feature, you must subscribe to the Caller Line ldentification service. See "Caller Line Identification" on page 20. This menu enables you to select and set the melodies to be played when there is an external incoming call from a contact whose name is stored in your phonebook and is part of a group.
A confirmation beep is emitted and the screen returns to previous menu. Handset Name You can name the handset and display the handset name in stand-by mode. The default handset name of your handset is PHILIPS. To rename the handset Press...
Edit the handset name and press A confirmation beep is emitted and the screen returns to previous menu. Maximum length of the handset name is 12 characters and the default handset name is PHILIPS. Auto Pick-up This function enables you to answer a call automatically by simply lifting the handset from the base station. By default, the Auto Pick-up feature is Off.
Personal Settings Babysit mode You must have at least 2 handsets registered to your base station to be able to use this feature (see page 43 "To register an additional handset"). This feature allows you to monitor, e.g. the baby’s room. Place the handset in the room to be monitored. If the sound level around the microphone of the handset exceeds a certain threshold, the handset can automatically call another handset registered on the same base station.
Recall time (or dial delay) is the time delay by which the line will be disconnected after you press It can be set to short, medium or long. The default value of recall time that is preset in your SE630 should be the best suited for your country network and therefore you should not need to change it.
Advanced Settings Dial Mode The default value for dial mode that is preset in your SE630 should be the best suited for your country network and therefore you should not need to change it. There are 2 dial modes: Tone or Pulse.
Baby Call When activated, the Baby Call feature enables you to dial a number by pressing any key on your handset. This feature is very useful for direct access to emergency services. You can enter up to 24 digits for baby call number. If you have modified the Master PIN before and it is not the default 0000, you will be required to enter the Master PIN before you can activate or deactivate number.
A long confirmation tone is emitted to indicate successful registration and the screen returns to stand-by mode. Select Base One SE630 handset can register up to 4 different SE630 Base stations. By default, the handset will register to Base, the handset will register to the nearest base station. BASE 1. If you select...
Unregistration To unregister a handset Press , scroll MENU press SELECT Enter the Master PIN when prompted and press Press on the handset keypad the handset number corresponding to the handset that you wish to unregister. If there are no key presses within 15 seconds, the unregistration procedure will be aborted and the handset returns to stand-by mode.
Advanced Settings Reset Reset to default settings Press , scroll MENU SELECT Enter the Master PIN when prompted and press If your PIN number is the default 0000, step 2 is skipped. Scroll and press A confirmation beep is emitted, and the unit is reset to its default settings (please see "Default settings" on page 16).
Scroll to the country of your choice and press Once the country is selected, the default line settings for the selected country will be applied to the phone automatically (e.g. Recall time, Dial mode, Language, etc). Conference Mode When Conference mode is activated, you can initiate a three-party conference call with a second handset registered to your base station automatically if the second handset takes the line when there is already an external call in progress.
Contact your network provider for more information about these services. The default numbers and values that are preset in your SE630 should be the best suited for your country network and therefore you should not need to change them.
Scroll to the type of call forwarding option you wish to set UnAns) and press Deactivate Scroll The number string for that selected service will be dialled. When the number has been dialled, press Voice Mail This feature allows the caller to leave a voice message when you are unable, or do not wish to take a call yourself.
Network Services When the number has been dialled, press Cancel Call Back Setting Press , scroll MENU press SELECT Scroll Settings and press Enter the required number for cancelling of call back and press Activate Cancel Call Back Press MENU , scroll press SELECT...
Memory The objective of this game is to find and match different pairs of graphics in the shortest possible time using your memory. To win, you have to complete matching all 8 pairs of graphics in a 4x4 matrix. To start the game Press , scroll MENU...
• Register the handset to the base station • Move closer to the base station Transfer the phonebook entries that are on your mobile phone memory to your mobile phone SIM card and then to your SE630.
• Maximum number of handsets (5) has been reached • Base station is already busy with another handset Your SE630 base station or mains power pack are too close to electrical appliances The service is not activated The ring tone is deactivated The phonebook is full •...
Philips is committed to develop, produce and market products that cause no adverse health effects. Philips confirms that if its products are handled properly for their intended use, they are safe to use according to scientific evidence available today.